Abstract
Mannan-binding lectin (MBL) is an oligomeric lectin that binds neutral carbohydrates on pathogens, forms complexes with MBL-associated serine proteases (MASP)-1, -2, and -3 and 19-kDa MBL-associated protein (MAp19), and triggers the complement lectin pathway through activation of MASP-2. To identify the MASP binding site(s) of human MBL, point mutants targeting residues C-terminal to the hinge region were produced and tested for their interaction with the MASPs and MAp19 using surface plasmon resonance and functional assays. Mutation Lys55Ala abolished interaction with the MASPs and MAp19 and prevented formation of functional MBL-MASP-2 complexes. Mutations Lys55Gln and Lys55Glu abolished binding to MASP-1 and -3 and strongly inhibited interaction with MAp19. Conversely, mutation Lys55Arg abolished interaction with MASP-2 and MAp19, but only weakened interaction with MASP-1 and -3. Mutation Arg47Glu inhibited interaction with MAp19 and decreased the ability of MBL to trigger the lectin pathway. Mutant Arg47Lys showed no interaction with the MASPs or MAp19, likely resulting from a defect in oligomerization. In contrast, mutation Arg47Ala had no impact on the interaction with the MASPs and MAp19, nor on the ability of MBL to trigger the lectin pathway. Mutation Pro53Ala only had a slight effect on the interaction with MASP-1 and -3, whereas mutations at residues Leu49 and Leu56 were ineffective. In conclusion, the MASP binding site of MBL involves a sequence stretch centered on residue Lys55, which may form an ionic bond representing the major component of the MBL-MASP interaction. The binding sites for MASP-2/MAp19 and MASP-1/3 have common features but are not strictly identical.
Mannan-binding lectin (MBL),3 a member of the collectin family, is an oligomeric C-type lectin that recognizes and binds patterns of neutral carbohydrates such as mannose and N-acetylglucosamine present on the surface of pathogens (1, 2). It is a major actor of innate immunity, due to its ability to opsonize pathogens and thereby enhance their phagocytosis, and to activate the complement cascade via the lectin pathway (3). The latter activity results from the ability of MBL to associate with MBL-associated serine protease MASP-2, a protease that shares with complement protease C1s the specific property of cleaving complement proteins C4 and C2 (4, 5). In addition to MASP-2, MBL binds to its homologs MASP-1 and MASP-3, as well as to MBL-associated protein 19 (MAp19) (6, 7, 8, 9).
Human MBL is assembled from a single polypeptide chain, consisting of a 21-residue cysteine-containing N-terminal stretch, a collagen-like region comprising 19 repeating Gly-X-Y triplets with one interruption causing a bend in the structure, a 34-residue hydrophobic stretch, and a 112-residue C-terminal C-type lectin carbohydrate recognition domain. The chains associate to form a homotrimeric structural unit comprising a collagen-like triple helix, an α helical coiled-coil or “neck” region, and three carbohydrate recognition domains (10). The structure is stabilized by interchain disulfide bonds that allow formation of bouquet-like oligomers comprising two to six or more structural units (11). The triple helices associate at their N-terminal end to form a stalk and then diverge at the level of the interruption in the Gly-X-Y sequence, defining a hinge in the molecule. The two major oligomeric forms of MBL isolated from human plasma have been identified as trimers and tetramers of the structural unit (12). A recombinant form of human MBL has been produced in human cells and shown to exhibit an oligomerization pattern similar to that of plasma-derived MBL (13, 14).
MASP-1, MASP-2, and MASP-3 each exhibit homologous modular structures, with an N-terminal CUB module (15), an epidermal growth factor (EGF)-like module (16), a second CUB module, two complement control protein (CCP) modules (17), and a serine protease domain. MASP-1 and MASP-3, which are alternative splicing products of the MASP1/3 gene, comprise identical CUB1-EGF-CUB2-CCP1-CCP2 segments but different serine protease domains (7). MAp19 results from alternative splicing of the MASP-2 gene and comprises the same N-terminal CUB1-EGF segment as MASP-2, followed by four C-terminal residues unique to MAp19 (8, 9). Studies using recombinant human (18, 19, 20) and rat (21) proteins have shown that the MASPs and MAp19 each form homodimers through their N-terminal CUB1-EGF domains. In turn, each homodimer forms Ca2+-dependent complexes with MBL and with ficolins L and H through interactions involving primarily the CUB1-EGF moiety of each protein, but strengthened by the following CUB2 module (19, 20, 22).
Studies mainly based on the use of synthetic peptides have led to the conclusion that the MASPs bind on the C-terminal side of the hinge region of rat MBL (23). In line with these experiments, a three-dimensional model has been proposed for the interaction between human MAp19 and MBL, featuring major interactions between acidic residues of MAp19 and basic residues of MBL, including Lys55 (24). The purpose of this work was to test the validity of this model by generating a series of recombinant MBL point mutants to analyze their ability to interact with the MASPs and MAp19.
Materials and Methods
Proteins
Human MASP-1, the MASP-1/3 CUB1-EGF-CUB2 segment, and MAp19 were expressed using a baculovirus/insect cells system and purified as described previously (18, 19). Recombinant MASP-3 was expressed using the same system and purified as described by Zundel et al. (20), with some modifications as follows. After the first anion-exchange chromatography step, fractions containing MASP-3 were concentrated by ultrafiltration and final purification was achieved by high-pressure gel permeation on a TSK G-3000 SWG column (7.5 × 600 mm; Tosohaas) equilibrated in 145 mM NaCl, 1 mM CaCl2, and 50 mM triethanolamine-HCl, and run at 1 ml/min. Recombinant MASP-2 used for surface plasmon resonance analyses was also produced using a baculovirus/insect cell system (18). Other functional assays were performed using recombinant MASP-2 expressed in mammalian cells (4).
The concentrations of purified recombinant proteins were determined using the following absorption coefficients (A1%, 1 cm at 280 nm) and molecular weights: MASP-3, 12.9 and 87,600 (20); MAp19, 11.6 and 19,086 (18); and MASP-1 CUB1-EGF-CUB2 segment, 10.0 and 34,300 (19). Due to the low amount of material recovered, estimation of the concentration of recombinant MASP-1 and MASP-2 was based on Coomassie blue staining after SDS-PAGE analysis using appropriate internal standards and molecular masses of 82,000 and 75,100, respectively (18).
Site-directed mutagenesis
The expression plasmids coding for all MBL mutants were generated using the QuikChange XL site-directed mutagenesis kit (Stratagene) according to the manufacturer’s protocol. A pC1-MBL expression plasmid coding for wild-type (WT) MBL (25) was used as a template. Mutagenic oligonucleotides were purchased from MWG-BIOTECH. The sequences of all mutants were confirmed by dsDNA sequencing (Genome Express).
Production and purification of recombinant MBL variants
Two different methods were used for production of recombinant MBL. In most cases, plasmids containing the mutated MBL cDNA inserts were used for transfection of Freestyle 293-F cells (Invitrogen Life Technologies). Briefly, plasmids (1 μg/ml) were mixed with Lipofectamine 2000 (Invitrogen Life Technologies) and OptiMEM (Invitrogen Life Technologies) according to the manufacturer’s instructions and used for transfection of 293F cells (106 cells/ml). Cells were cultured for 4 days in Freestyle expression medium (Invitrogen Life Technologies) and supernatants were collected by centrifugation and stored in the presence of 0.01% sodium merthiolate. Supernatants were diluted 1/2 with 10 mM Tris-HCl, 145 mM NaCl, 5 mM CaCl2, 0.01% Tween 20 (pH 7.4), and passed through a column containing 0.5 ml of glucosamine-Sepharose beads (glucosamine-Sepharose 4FF; GE Healthcare). The beads were washed with the column buffer and bound MBL was eluted with 10 mM Tris, 145 mM NaCl, 5 mM EDTA, and 0.01% Tween 20 (pH 7.4). Fractions were collected and tested for MBL content.
Some of the MBL variants, as listed in Table I, were produced using CHO-K1 cells (American Type Culture Collection). Cells were cultured in D-MEM/F12 (1/1) with GlutaMAX I medium (Invitrogen Life Technologies) supplemented with 10% heat-inactivated FCS. Cells were transfected with the pC1-MBL constructs using Lipofectamine 2000 (Invitrogen Life Technologies) as described by the manufacturer. Selection of geneticin-resistant cells started 48 h after transfection, in the presence of 600 μg/ml geneticin sulfate (G418; Invitrogen Life Technologies) and 50 μg/ml ascorbic acid (Sigma-Aldrich). After 3–4 wk, selected colonies were subcloned in tissue culture plates and supernatants were tested for MBL production. The highest producer clone was selected and expanded in 175-cm2 flasks. Once confluence was reached, the medium was replaced with CD-CHO-A serum-free medium (Invitrogen Life Technologies) supplemented with 8 mM glutamine, 300 μg/ml geneticin, and 50 μg/ml ascorbic acid and was harvested and replaced every sixth day for 18 days. The cell culture supernatants were centrifuged, dialyzed against 145 mM NaCl, 5 mM CaCl2, and 20 mM Tris-HCl (pH 7.4), concentrated 20-fold by ultrafiltration and applied to a column of N-acetylglucosamine-agarose (Sigma-Aldrich) equilibrated in the dialysis buffer. Elution of the bound MBL was performed by applying the same buffer containing 10 mM EDTA instead of CaCl2. The purified protein was dialyzed against 145 mM NaCl, 2 mM CaCl2, and 50 mM triethanolamine-HCl (pH 7.4) and concentrated by ultrafiltration to 0.1–0.4 mg/ml. The concentration of recombinant MBL was measured by a time-resolved immunofluorometric assay involving catching of MBL on mannan-coated microtiter wells followed by detection with europium-labeled anti-MBL Ab, as described by Thiel et al. (26).
MBL Variant . | MASP-1 . | . | . | MASP-3 . | . | . | MASP-1/3 CUB1-EGF-CUB2 . | . | . | MAp19 . | . | . | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
. | kon (M−1 s−1) . | koff (s−1) . | KD (nM) . | kon (M−1 s−1) . | koff (s−1) . | KD (nM) . | kon (M−1 s−1) . | koff (s−1) . | KD (nM) . | kon (M− s−1) . | koff (s−) . | KD (nM) . | ||||||||
WTa | 1.8 × 105 | 1.7 × 10−3 | 9.4 | 2.1 × 105 | 9.0 × 10−3 | 4.3 | 2.0 × 105 | 1.6 × 10−3 | 8.0 | 2.1 × 105 | 1.4 × 10−3 | 6.7 | ||||||||
WTb | 1.7 × 105 | 1.8 × 10− | 10.6 | 2.5 × 105 | 1.9 × 10−3 | 7.6 | 2.5 × 105 | 2.0 × 10−3 | 8.0 | 2.8 × 105 | 4.1 × 10−3 | 14.6 | ||||||||
K55Aa | —c | —c | —c | —c | —c | —c | —c | —c | —c | —c | —c | NDc | ||||||||
K55Ea | —c | —c | —c | —c | —c | —c | —c | —c | —c | 86 | 3.1 × 10−3 | 36,000 | ||||||||
K55Qa | —c | —c | —c | —c | —c | —c | ND | ND | ND | 2.5 × 102 | 1.5 × 10−3 | 6,000 | ||||||||
K55Ra | 1.4 × 105 | 2.0 × 10−3 | 14.3 | 1.3 × 105 | 1.2 × 10−3 | 9.2 | ND | ND | ND | —c | —c | NDc | ||||||||
R47Ab | 1.3 × 105 | 3.2 × 10−3 | 24.6 | 2.0 × 105 | 2.2 × 10−3 | 11.0 | 2.6 × 105 | 2.4 × 10−3 | 9.2 | 1.4 × 105 | 3.2 × 10−3 | 22.8 | ||||||||
R47Ea | 7.7 × 104 | 2.2 × 10−3 | 28.6 | 1.1 × 105 | 1.9 × 10−3 | 17.3 | 1.1 × 105 | 1.9 × 10−3 | 17.3 | 7.8 × 104 | 6.7 × 10−3 | 85.9 | ||||||||
R47Kb | —c | —c | —c | —c | —c | —c | —c | —c | —c | —c | —c | NDc | ||||||||
P53Aa | 1.4 × 105 | 2.8 × 10−3 | 20.0 | 1.8 × 105 | 3.4 × 10−3 | 18.9 | ND | ND | ND | 3.2 × 105 | 1.8 × 10−3 | 5.6 | ||||||||
L49Aa | 1.6 × 105 | 1.3 × 10−3 | 8.1 | 2.0 × 105 | 1.0 × 10−3 | 5.0 | 2.7 × 105 | 1.5 × 10−3 | 5.5 | 2.5 × 105 | 1.4 × 10−3 | 5.6 | ||||||||
L49Ga | 1.6 × 105 | 1.8 × 10−3 | 11.2 | 1.9 × 105 | 1.2 × 10−3 | 6.3 | 2.7 × 105 | 1.8 × 10−3 | 6.7 | 2.0 × 105 | 1.8 × 10−3 | 9.0 | ||||||||
L56Aa | 1.5 × 105 | 1.1 × 10−3 | 7.3 | 1.9 × 105 | 7.1 × 10−4 | 3.7 | 2.0 × 105 | 1.3 × 10−3 | 6.5 | 4.7 × 105 | 1.7 × 10−3 | 3.7 | ||||||||
L56Ga | 1.4 × 105 | 1.9 × 10−3 | 13.6 | 1.7 × 105 | 1.4 × 10−3 | 8.2 | 2.1 × 105 | 2.5 × 10−3 | 11.9 | 2.5 × 105 | 1.7 × 10−3 | 6.8 | ||||||||
L56Sa | 1.7 × 105 | 1.9 × 10−3 | 11.2 | 2.1 × 105 | 1.4 × 10−3 | 6.7 | 2.5 × 105 | 2.2 × 10−3 | 8.8 | 3.5 × 105 | 1.5 × 10−3 | 4.3 |
MBL Variant . | MASP-1 . | . | . | MASP-3 . | . | . | MASP-1/3 CUB1-EGF-CUB2 . | . | . | MAp19 . | . | . | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
. | kon (M−1 s−1) . | koff (s−1) . | KD (nM) . | kon (M−1 s−1) . | koff (s−1) . | KD (nM) . | kon (M−1 s−1) . | koff (s−1) . | KD (nM) . | kon (M− s−1) . | koff (s−) . | KD (nM) . | ||||||||
WTa | 1.8 × 105 | 1.7 × 10−3 | 9.4 | 2.1 × 105 | 9.0 × 10−3 | 4.3 | 2.0 × 105 | 1.6 × 10−3 | 8.0 | 2.1 × 105 | 1.4 × 10−3 | 6.7 | ||||||||
WTb | 1.7 × 105 | 1.8 × 10− | 10.6 | 2.5 × 105 | 1.9 × 10−3 | 7.6 | 2.5 × 105 | 2.0 × 10−3 | 8.0 | 2.8 × 105 | 4.1 × 10−3 | 14.6 | ||||||||
K55Aa | —c | —c | —c | —c | —c | —c | —c | —c | —c | —c | —c | NDc | ||||||||
K55Ea | —c | —c | —c | —c | —c | —c | —c | —c | —c | 86 | 3.1 × 10−3 | 36,000 | ||||||||
K55Qa | —c | —c | —c | —c | —c | —c | ND | ND | ND | 2.5 × 102 | 1.5 × 10−3 | 6,000 | ||||||||
K55Ra | 1.4 × 105 | 2.0 × 10−3 | 14.3 | 1.3 × 105 | 1.2 × 10−3 | 9.2 | ND | ND | ND | —c | —c | NDc | ||||||||
R47Ab | 1.3 × 105 | 3.2 × 10−3 | 24.6 | 2.0 × 105 | 2.2 × 10−3 | 11.0 | 2.6 × 105 | 2.4 × 10−3 | 9.2 | 1.4 × 105 | 3.2 × 10−3 | 22.8 | ||||||||
R47Ea | 7.7 × 104 | 2.2 × 10−3 | 28.6 | 1.1 × 105 | 1.9 × 10−3 | 17.3 | 1.1 × 105 | 1.9 × 10−3 | 17.3 | 7.8 × 104 | 6.7 × 10−3 | 85.9 | ||||||||
R47Kb | —c | —c | —c | —c | —c | —c | —c | —c | —c | —c | —c | NDc | ||||||||
P53Aa | 1.4 × 105 | 2.8 × 10−3 | 20.0 | 1.8 × 105 | 3.4 × 10−3 | 18.9 | ND | ND | ND | 3.2 × 105 | 1.8 × 10−3 | 5.6 | ||||||||
L49Aa | 1.6 × 105 | 1.3 × 10−3 | 8.1 | 2.0 × 105 | 1.0 × 10−3 | 5.0 | 2.7 × 105 | 1.5 × 10−3 | 5.5 | 2.5 × 105 | 1.4 × 10−3 | 5.6 | ||||||||
L49Ga | 1.6 × 105 | 1.8 × 10−3 | 11.2 | 1.9 × 105 | 1.2 × 10−3 | 6.3 | 2.7 × 105 | 1.8 × 10−3 | 6.7 | 2.0 × 105 | 1.8 × 10−3 | 9.0 | ||||||||
L56Aa | 1.5 × 105 | 1.1 × 10−3 | 7.3 | 1.9 × 105 | 7.1 × 10−4 | 3.7 | 2.0 × 105 | 1.3 × 10−3 | 6.5 | 4.7 × 105 | 1.7 × 10−3 | 3.7 | ||||||||
L56Ga | 1.4 × 105 | 1.9 × 10−3 | 13.6 | 1.7 × 105 | 1.4 × 10−3 | 8.2 | 2.1 × 105 | 2.5 × 10−3 | 11.9 | 2.5 × 105 | 1.7 × 10−3 | 6.8 | ||||||||
L56Sa | 1.7 × 105 | 1.9 × 10−3 | 11.2 | 2.1 × 105 | 1.4 × 10−3 | 6.7 | 2.5 × 105 | 2.2 × 10−3 | 8.8 | 3.5 × 105 | 1.5 × 10−3 | 4.3 |
Material expressed in 293-F cells.
Material expressed in CHO cells.
—, Value not measurable due to the weakness of the binding.
SDS-PAGE analysis of the MBL oligomerization state
MBL samples were analyzed by SDS-PAGE under nonreducing conditions using Tris-acetate gels containing a 3–8% polyacrylamide gradient. Proteins were transferred to a polyvinylidene difluoride membrane and detected by Western blotting using the mouse monoclonal anti-human MBL Ab Hyb131-01 (AntibodyShop) and a HRP-conjugated polyclonal rabbit anti-mouse Ab (DakoCytomation) as primary and secondary Abs, respectively.
Surface plasmon resonance spectroscopy and data evaluation
Analyses were performed using a Biacore 3000 instrument (Biacore). The MBL variants were diluted to 20 μg/ml in 10 mM sodium acetate (pH 4.0) and immobilized at 4000–7000 resonance units on the surface of CM5 sensor chips (Biacore) using the amine-coupling chemistry as described by Teillet et al. (12). Binding of MASP-2 and MAp19 to the immobilized MBL variants was measured at a flow rate of 20 μl/min in 145 mM NaCl, 2 mM CaCl2, and 50 mM triethanolamine-HCl (pH 7.4) containing 0.005% surfactant P20 (Biacore). Due to their high content in N-linked oligosaccharides, binding of MASP-1, MASP-3, and their CUB1-EGF-CUB2 segment was measured under the same conditions in the presence of 10 mM mannose to prevent potential interaction with the lectin domain of MBL. Equivalent volumes of each protein sample were injected in parallel over a surface with immobilized BSA to serve as blank sensorgrams for subtraction of the bulk refractive index background. Regeneration of the surfaces was achieved by injection of 10 μl of the running buffer containing 5 mM EDTA instead of 2 mM CaCl2. Data were analyzed by global fitting to a 1/1 Langmuir binding model of both the association and dissociation phases for several concentrations simultaneously using the BIAevaluation 3.2 software (Biacore). The apparent equilibrium dissociation constants (KD) were calculated from the ratio of the dissociation and association rate constants (koff/kon). The χ2 value, which is a standard statistical measure of the fit (BIA evaluation 3 software handbook), was <5 in all cases.
Assay of the ability of MBL variants to associate with MASP-2
Recombinant MBL variants were diluted serially in 10 mM Tris-HCl, 1 M NaCl, 5 mM CaCl2, and 0.05% Triton X-100 (pH 7.4) containing 100 μg/ml human serum albumin and were added to recombinant MASP-2 (0.5 μg/ml) in the same buffer. Samples were then transferred to mannan-coated microtiter wells and incubated overnight at 4°C. Wells were washed with 10 mM Tris-HCl, 145 mM NaCl, 5 mM CaCl2, and 0.05% Tween 20 (pH 7.4) and then incubated for 2 h with biotin-labeled monoclonal anti-MASP-2 (6G12) as described previously by Møller-Kristensen et al. (27). The wells were washed and europium-labeled streptavidin, diluted in 10 mM Tris-HCl, 145 mM NaCl, and 25 μM EDTA (pH 7.4), was added. After incubation for 1 h, wells were washed and the amount of europium in the wells was measured by time-resolved fluorometry.
Assay of the ability of MBL variants to activate C4 upon incubation with MASP-2
Recombinant MBL variants were diluted serially in 10 mM Tris-HCl, 1 M NaCl, 5 mM CaCl2, and 0.05% Triton X-100 (pH 7.4) containing 100 μg/ml human serum albumin and added to recombinant MASP-2 (0.5 μg/ml) in the same buffer. Samples were then transferred to mannan-coated microtiter wells and incubated overnight at 4°C. Wells were washed with 10 mM Tris-HCl, 145 mM NaCl, 5 mM CaCl2, and 0.05% Tween 20 (pH 7.4) and then incubated for 90 min at 37°C with 2 μg/ml complement component C4 purified according to Dodds (28). The wells were washed and a mixture of two biotin-labeled anti-human C4 mAbs (162.2 and 162.1 from AntibodyShop) was added. After incubation for 2 h, wells were washed and europium-labeled streptavidin, diluted in 10 mM Tris-HCl, 145 mM NaCl, and 25 μM EDTA (pH 7.4), was added. After incubation for 1 h, wells were washed and the amount of europium in the wells was measured by time-resolved fluorometry. Results are expressed relative to a standard curve obtained by dilution of a standard serum as described by Petersen et al. (29).
Assay of the ability of MBL variants to trigger the lectin pathway of complement
Recombinant MBL variants in 4 mM sodium barbital, 145 mM NaCl, 2 mM CaCl2, and 1 mM MgCl2 (pH 7.4) were mixed with one volume of MBL-deficient serum diluted 1/25 in the same buffer. Samples were added to mannan-coated microtiter wells and incubated overnight at 4°C. Wells were washed with 10 mM Tris-HCl, 145 mM NaCl, 5 mM CaCl2, and 0.05% Tween 20 (pH 7.4) and samples were tested for their ability to deposit C4 fragments onto the mannan-coated surface as described above.
Results
To locate the site(s) of MBL involved in the interaction with the MASPs, a series of recombinant point mutants were produced to analyze their binding properties. Several residues from the collagen-like region of MBL, located on the C-terminal side of the hinge region, were targeted for this purpose. Lys55 appeared as a major candidate because 1) it belongs to the sequence stretch proposed to be involved in MASP binding in rat MBL (23); 2) it does not undergo posttranslational hydroxylation in human MBL (30 ; Fig. 1); and 3) in addition to MBL, it is also widely conserved in the ficolins (Fig. 1). Arg47, which along with Lys55 has been proposed to participate in the interaction with MAp19 (24), was also selected as a target. Leu49, Pro53, and Leu56 were also subjected to site-directed mutagenesis, mainly to test their implication in a possible hydrophobic component of the interaction, as suggested in the model proposed by Gregory et al. (24). All target residues were mutated to Ala and/or to other amino acids as listed in Table I. The resulting MBL variants were produced by means of two different mammalian expression systems, each known to achieve proper posttranslational modifications of the collagen-like sequence of MBL (4, 13), and purified to homogeneity by affinity chromatography on either glucosamine-Sepharose or N-acetyl-glucosamine-agarose beads as specified in Materials and Methods. All MBL variants were produced at yields comparable to that of the WT protein, except mutant Lys55Arg, which was consistently obtained at lower yields.
Analysis of the interaction properties of the MBL variants by surface plasmon resonance spectroscopy
The ability of each MBL variant to associate with the MASPs was analyzed by surface plasmon resonance spectroscopy using immobilized MBL and either MASP-1, MASP-2, MASP-3, or MAp19 as soluble ligands. In contrast to MASP-2 and MAp19, MASP-1 and MASP-3 each contain several N-linked oligosaccharides. Due to the use of a baculovirus/insect cells expression system, these will belong to the high-mannose type and are therefore possible targets for the C-type lectin carbohydrate recognition domain of MBL (31). To prevent this unwanted interaction, binding of MASP-1 and MASP-3 to immobilized MBL was systematically conducted in the presence of excess free mannose as described in Materials and Methods. Comparative binding experiments at varying mannose concentrations indicated that recognition of MASP-1 and MASP-3 through the lectin domain of MBL was prevented in the presence of 10 mM mannose. In contrast, similar kinetic constants for binding of MAp19 to MBL were determined in the presence or absence of mannose (data not shown).
The MASPs and MAp19 each readily associated with immobilized WT MBL in the presence of Ca2+ ions, as illustrated by the representative binding curves shown in Fig. 2,A (MASP-1), B (MASP-2), and C (MAp19). The kinetic parameters for the interaction with MASP-1, MASP-3, and MAp19 were determined, yielding comparable KD values for both MBL preparations, ranging from 4.3 to 14.6 nM (Table I), in keeping with previous measurements (18, 19, 20). Unfortunately, due to the low amounts of recombinant material available, the binding parameters could not be determined in the case of MASP-2.
Replacement of Lys55 by Ala, Gln, or Glu either abolished or strongly inhibited interaction of MBL with the MASPs and MAp19. In the case of mutants Lys55Gln and Lys55Glu, a faint residual binding to MAp19 could still be measured, but the KD values increased dramatically, due to decreased kon values (Table I). Conversely, whereas mutation of Lys55 to Arg abolished interaction with MASP-2 and MAp19 (Fig. 2, B and C), it did not prevent binding to MASP-1 and MASP-3, with only 1.5- and 2.1-fold increases in KD, resulting from both a decrease in kon and an increase in koff (Fig. 2,A and Table I). The Lys55Ala mutant showed no detectable interaction with either of the MASPs or MAp19.
Arg47 was modified to Ala, Lys, or Glu. The Arg47Glu mutant consistently showed a decreased affinity for MASP-1, MASP-3, and MAp19. However, the inhibitory effect was much more pronounced for MAp19, with a 13-fold increase in KD, resulting from both decreased kon and increased koff values (Table I). In the case of MASP-1 and MASP-3, the KD values increased 3.0- and 4.0-fold, respectively, and a comparable 2.2-fold increase was observed for the MASP-1/3 CUB1-EGF-CUB2 interaction domain (Table I). Surprisingly, the Arg47Lys mutant showed no detectable interaction with either of the MASPs or MAp19 (Table I). The Arg47Ala mutation had a slight impact on the interaction with MASP-1, as judged from the 2.3-fold increase in the KD value, but no significant effect on the interactions with MASP-3, the MASP-1/3 CUB1-EGF-CUB2 segment, and MAp19 (Table I).
Leu49 and Leu56 were mutated to Ala and Gly and to Ala, Gly, and Ser, respectively. As listed in Table I, none of these mutations had a significant effect on the interaction between MBL and either MASP-1, MASP-3, the MASP-1/3 CUB1-EGF-CUB2 segment, or MAp19. Replacement of Pro53 by Ala slightly increased the KD of the interaction with MASP-1 and MASP-3 due to increased koff values, but had no impact on the interaction with MAp19 (Table I).
Effect of MBL mutations on interaction with MASP-2
To further analyze their ability to associate with MASP-2, selected MBL mutants were mixed with recombinant MASP-2, incubated in mannan-coated wells, and bound MBL-MASP-2 complexes were revealed by reaction with an anti-MASP-2 Ab (see Materials and Methods). The amount of MBL bound to the mannan-coated wells was similar for all variants as detected by an anti-MBL Ab. As illustrated in Fig. 3, increasing the concentration of WT MBL resulted in increased MASP-2 binding, and similar binding curves were obtained using point mutants at Leu49 and Leu56. In contrast, no detectable binding was observed for mutants Lys55Ala and Lys55Glu, providing additional evidence that both mutations abolished MBL interaction with MASP-2, as also observed by surface plasmon resonance spectroscopy.
Effect of MBL mutations on its ability to trigger activation of the lectin pathway
To further assess the ability of the MBL mutants to form a functional MBL-MASP-2 complex, selected mutants were mixed with a MBL-deficient serum, incubated in mannan-coated wells, and tested for their ability to induce deposition of C4 fragments on the mannan-coated surface. Again, in keeping with the above binding experiments, no C4 deposition was detected in the case of mutants Lys55Ala and Lys55Glu (Fig. 4). Mutation Arg47Glu also resulted in a marked decrease in C4-cleaving activity, in agreement with the pronounced inhibition of the MBL-MAp19 interaction observed by surface plasmon resonance spectroscopy (Table I and Fig. 2 C). The mutants at positions Leu49 and Leu56, as well as mutants Arg47Ala and Pro53Ala had C4-cleaving activities similar to that of WT MBL.
The functionality of certain MBL variants was further assessed by testing their ability to activate purified C4 upon incubation with MASP-2 using the assay described in Materials and Methods. Again, mutants at positions Leu49 and Leu56 retained a C4-cleaving activity similar to that of WT MBL. In contrast, mutants Lys55Ala, Lys55Glu, and Lys55Arg failed to cleave C4 (data not shown).
Effect of point mutations on the oligomerization state of MBL
To check the effect of point mutations on the oligomeric state of the protein, the MBL mutants were submitted to SDS-PAGE analysis. As illustrated in Fig. 5, analysis under nonreducing conditions of mutants Lys55Ala and Lys55Arg yielded ladder-like patterns similar to those characteristic of WT MBL. In each instance, bands with apparent molecular masses of 26, 52, 78, and 156 kDa were observed, with major species at ∼235 and 310 kDa corresponding to disulfide-linked trimers and tetramers of the structural unit, respectively, as described previously for serum-derived and recombinant WT MBL (12, 14). Among the different MBL variants produced in the course of this study, only the Arg47Lys mutant yielded a different electrophoretic pattern, with a significant decrease in the proportion of higher oligomers (data not shown). All other mutants yielded patterns similar to the WT protein, indicating that the corresponding mutations had no significant impact on the folding and oligomerization of MBL. Under reducing conditions, all variants, including the Arg47Lys mutant, yielded a single band of apparent molecular mass ∼32 kDa, characteristic of the single polypeptide chain of MBL (12, 14).
Discussion
The objective of this study was to gain precise information about the amino acid residues of human MBL involved in the interaction with the MASPs. For this purpose, a series of MBL variants targeting residues located on the C-terminal side of the hinge region of the protein were produced using two alternative mammalian expression systems and tested for their ability to associate with the MASPs and MAp19 using surface plasmon resonance spectroscopy and functional assays. Using either expression system, all variants except Lys55Arg were produced at yields comparable to that of WT MBL. In the same way, all mutants could be purified by affinity chromatography on N-acetylglucosamine- or glucosamine-derivatized beads, implying that they essentially retained the carbohydrate-binding properties characteristic of WT MBL. Further analyses by surface plasmon resonance spectroscopy were performed, indicating that all variants tested bound to immobilized mannose-BSA in similar ways (data not shown). This was confirmed by analysis of the binding of the MBL variants to mannan-coated microtiter wells. However, mutant Arg47Lys showed a significantly decreased binding efficiency, consistent with a decreased content in higher oligomers as seen by SDS-PAGE analysis.
The major conclusion from this study is that Lys55 plays an essential role in the association of MBL with its partner serine proteases. This is clearly illustrated by the fact that mutation of Lys55 to Ala abolishes interaction with all three MASPs and MAp19 as measured by surface plasmon resonance spectroscopy and prevents formation of enzymatically active MBL/MASP-2 complexes as demonstrated by different functional assays. Nevertheless, the other mutations at Lys55 have differential effects on the interaction properties of MBL. Thus, mutations Lys55Gln and Lys55Glu abolish binding to MASP-1 and MASP-3, but only strongly inhibit interaction with MAp19. Conversely, replacement of Lys55 by Arg abolishes interaction with MASP-2 and MAp19, but only slightly weakens interaction with MASP-1 and MASP-3, suggesting that, whereas Arg is tolerated at position 55 for binding to MASP-1 and MASP-3, there is a strict requirement for Lys for interaction with MASP-2 and MAp19. In line with the observations by Wallis et al. (23), the above findings provide a strong indication that the MBL binding sites for MASP-2/MAp19 and for MASP-1/3 are structurally similar but not strictly identical.
Our identification of Lys55 as a key player in the interaction of human MBL with its partner proteases is in keeping with the report by Wallis et al. (23) indicating that the MASP binding site of rat MBL involves a sequence stretch surrounding this residue. It should also be emphasized that Lys55 is conserved in all MBL species of known sequence except porcine MBL (Fig. 1). In addition, along with Lys29, Lys55 is one of the two conserved Lys residues of the human MBL collagen-like region that do not undergo posttranslational hydroxylation (23, 30). Thus, contrary to other Lys residues that carry disaccharide moieties, Lys55 is fully accessible and available for an ionic interaction with an acidic residue contributed by the MASPs. Indeed, in support of this hypothesis, preliminary chemical cross-linking experiments based on the use of 1-ethyl-3-(3-(dimethylamino-propyl)carbodiimide (a reagent able to convert salt bridges between carboxyl and amino groups into covalent bonds) provide support for the involvement of a salt bridge at the interface between MBL and MASP-3 (data not shown).
Analysis of the interaction properties of the MBL variants with point mutations at residue Arg47 yields more complex results. Thus, substitution of Glu for Arg has a significant inhibitory effect on the interaction with MAp19 and, to a lesser extent, with MASP-1 and MASP-3. These observations, and the fact that the Arg47Glu mutation markedly decreases the ability of MBL to trigger the lectin pathway, suggest at first sight a direct involvement of Arg47 in the interaction with MASP-2. However, the Arg47Ala mutation has very little effect on the interaction with MASP-1, no significant impact on the interaction with MASP-3 and MAp19, and no effect on the ability of MBL to trigger the lectin pathway. Based on these considerations, we propose that Arg47 is likely not directly involved in the MBL-MASP interface, but rather plays an indirect role in the long-range charge attraction between these proteins. Thus, replacement of Arg by Glu would have a repulsive effect, whereas Ala would have little or no impact. Finally, our finding that the Arg47Lys mutant shows no detectable interaction with the MASPs or MAp19 should be interpreted with great caution, considering that this mutant is the only one produced in this study showing an abnormal oligomerization pattern, characterized by a greatly reduced proportion of higher oligomers. Why this particular mutation results in defects in the oligomerization process remains to be elucidated. Nevertheless, because substitution of Lys for Arg at position 47 creates a Xaa-Lys-Gly consensus sequence for hydroxylation (32), it is tempting to hypothesize that subsequent glycosylation of Lys47 generates steric hindrance, thereby impairing oligomerization. At any rate, this side effect, per se, provides a sound explanation for the observed lack of interaction with the MASPs, since lower MBL oligomers are known to be less efficient in this respect than higher oligomers (22, 23, 33). Thus, from our point of view, the lack of interaction of the Arg47Lys mutant as observed in this study has no bearing on the implication of Arg47 at the MBL-MASP interface.
Although mutation of Pro53 to Ala has a slight effect on the interaction of MBL with MASP-1 and MASP-3, it has no detectable impact on the interaction with MAp19 and no effect on MBL ability to trigger activation of the lectin pathway. It appears unlikely, therefore, that Pro53 (which in human MBL is modified to hydroxyproline (23, 30)) contributes directly to the MBL-MASP interaction. Considering that this residue is located in close vicinity of Lys55, the slight effects resulting from the Pro53Ala mutation may arise from local structural modifications within the sequence stretch surrounding Lys55. Finally, none of the mutations performed at Leu49 and Leu56 has a detectable effect on the interaction of MBL with the MASPs and MAp19, nor on its ability to form a functional complex with MASP-2. This possibly reflects the fact that these residues do not contribute to a great extent to the interaction with the MASPs. However, it cannot be excluded that they participate in hydrophobic contacts that are not totally destabilized by the mutations (to Ala, Gly, Ser) performed in this study. Whatever is the role of Leu56 in the MBL-MASP interaction, it is clearly not critical, and therefore it is likely that the lack of binding observed by others (23) for a rat MBL-A mutant, where Lys46-Leu47, the counterpart in rat MBL of the human Lys55-Leu56 stretch, was replaced by Pro-HyPro, was due for the most part to the mutation of Lys46.
In summary, it may be concluded from these experiments that the MASP binding site of MBL involves a sequence stretch centered on Lys55, which lies on the C-terminal side of the hinge region of MBL, about half-way along the collagen-like region of this protein. This particular residue is likely to be directly involved in an ionic bond with an acidic residue contributed by the MASPs, the resulting interaction representing a major component of the MBL/MASP assembly. These findings provide experimental support to the three-dimensional model proposed for the interaction between MBL and MAp19 (24). Finally, it should be emphasized that Lys55 is also conserved in all ficolins of known sequence except pig α ficolin (Fig. 1). In keeping with our previous finding that mutations on MAp19 have comparable effects on the interaction with MBL and L-ficolin (24), it appears likely therefore that MBL and the ficolins share homologous MASP binding sites. Conversely, it is interesting to note that lung surfactant protein A, a member of the collectin family that has an overall structure similar to that of MBL, but does not interact with the MASPs (34), features an Asn residue at the position corresponding to Lys55 of MBL (Fig. 1).
Acknowledgments
We are grateful to Annette G. Hansen and Louise H. Jakobsen for their excellent technical assistance.
Disclosures
The authors have no financial conflict of interest.
Footnotes
The costs of publication of this article were defrayed in part by the payment of page charges. This article must therefore be hereby marked advertisement in accordance with 18 U.S.C. Section 1734 solely to indicate this fact.
This work was supported by the Commissariat à l’Energie Atomique, the Centre National de la Recherche Scientifique, and the Université Joseph Fourier (Grenoble, France).
Abbreviations used in this paper: MBL, mannan-binding lectin; MASP, MBL-associated serine protease; MAp19, 19-kDa MBL-associated protein; CUB, module originally found in complement proteins; C1r/C1s, Uegf, and bone morphogenetic protein 1; EGF, epidermal growth factor; CCP, complement control protein; CHO, Chinese hamster ovary; WT, wild type.